Forklift University, inc. provides the best and most comprehensive forklift and aerial lift training in Phoenix, Tucson and around the entire state of Arizona. It does not matter if your company needs on site forklift training and evaluations or a Train the Trainer course. Or you are an individual that needs certification or hands on driver training, Forklift University in Phoenix can get you OSHA certified with the right training today! Call our office and find out how we can make sure you or your operators are forklift certified! Our local Phoenix number is 602-903-1895.

Get forklift certified online for only $49.95! Good in all states.

$49.99 Gets you Forklift Certified for 3 Years

If you have experience operating a forklift and need to take the formal training class to become certified, this on line class is the best way to get your operator license. This online class only costs 49.99 and will take about an hour to complete.

Read More

Company Training

Your company can be 100% OSHA compliant with on site operator or Train the Trainer classes at your facility. When our instructors teach t your place of business, we discuss your site specific safety issues in addition to the standard OSHA requirements. Train the Trainer classes provide on site instruction and all the materials, videos test needed to make sure your company trainer is completely ready to train. Te Train the Trainer program includes materials in MS Word so you can edit and reprint and several videos not just the single standard video provided by other companies.

Read More

Hands on Driver Training

Individuals can take the online class or come in for a certification class at our facility in Phoenix. But if you have never driven a forklift and need hands on driver training, then your only and best choice is Forklift University.. We provide hands on driver training to individuals that need to learn to operate a standard lift, our classes are limited to 3 students and you will get plenty of seat time in your pursuit of a higher paying career.

Read More

Forklift Forks should be at least 2/3 under a load

Many forklift operators pickup loads and only put the forks through part of the load for many reasons. But how far is safe?

We all agree that forks under the full load is best but what if the racks are back to back or the load is against a wall?

If you go under the full load in this situation you can catch on the other load and knock it off the opposite side rack or pop a hole in the wall.

So best practice is to be at least TWO THIRDS 2/3 under the load and Pick up a load with your forks under at least 2/3 of your load, then if you can bring the load down and get the entire load.

So what does 2/3 look like? Here is a photo at Merchants Metals where they pick up loads with the right amount of forks.

You will notice that the forks are way more than 1/2 way under the load!

Get your forklift certification at Forklift University and learn to drive a forklift, get your forklift license and change your life with a forklift career and a great forklift job.

Forklfit Loads

What is this goofy fish bowl hanging off the side of this forklift?

What is this goofy fish bowl hanging off the side of this forklift?

A certified and forklift trained operator should know about the forklift as well as the safety aspects of the unit. By being forklift certified you gain additional knowledge about the safe operation of your forklift. While OSHA forklift safety training is mandatory in the USA, a good operator will also find out about the individual parts of their lift.

So what is it?

It’s an engine air pre-cleaner used to separate out heavy  particles from the air before they reach the filter.

You might see these at a construction site or anywhere with a lot of airborne debris and moisture. Some may look different than other but they all use the natural spin of the air entering the intake to eject heavier dust and moisture drastically extending the life of filters.

For more information about forklift operator training, forklift certification classes, a forklift license or forklift jobs in your area, check out We have hands on forklift training, on line forklift training and classes for company operators or individuals looking for forklift jobs.

Forklift University Training expanding around the country

Forklift University Training expanding around the countryForklift University already covers the southwest USA, but now we are expanding to other parts of the USA achat viagra naturel. With locations soon in Miami, Tampa and Jacksonville Florida leading the way for more east coast and mid west forklift training locations. 

Don’t do these 10 things on your Forklift

Good video on Youtube from Mitsubishi Forklifts in the UK. These 10 things all lead to major problems and accidents that could cost a life.

<iframe width="960" height="540" src=" acheter generic” frameborder=”0″ allowfullscreen>

Walkie Stacker forklift training for MIT in Las Vegas

Walkie Stacker forklift training for MIT in Las Vegas

MIT (Massachusetts Institute of Technology) took advantage of walkie stacker lift training today. Recently developed for Hussman in Chino, the class is designed to train and certify walkie stacker operators under the OSHA 1910.178 guidelines for powered industrial trucks. This class was developed by Forklift University to help operators get the proper safety training targeted to the lifts they will be using faut il prendre viagra.

At this MIT location, they only use a walkie stacker and did not want or need a full forklift safety class as was done in the past. So Forklift University provided a walkie stacker only class where operators got equipment and facility specific training, which included discussions of site hazards and the best operational adjustments to make sure they were safe while using the lift. If your company is looking for equipment specific forklift training at your facility please let us know, we can be reached by phone at 888-674-9992.

Forklift University provides training at your facility for all types of forklifts, (sit down, reach, walkie stacker, electric pallet jack, telehandlers, turret trucks) as well as other powered industrial equipment like sweepers, scrubbers and tuggers. We will do the training at your facility anywhere in Arizona, California, Nevada,  New Mexico, Utah and Texas. For those companies that want to provide their own training, we have train the trainer classes that provide all the materials, videos, testing and instructor training.

New Year Resolutions

New Year ResolutionsJanuary 1 has come and gone, we have all been back at work for a day or so now and the cobwebs are finally clearing viagra au naturel. So now would be a good time to make sure that your forklift license is still current. They are good for only 3 years and should be renewed after that time. Don't put this simple project off, the new year will get busy, projects will begin to pile up again and you could be in viloation of the OSHA training guideline 1910.178. can get your experienced operators certified in about 2 hours but if you need us to come to you, just let us know. For those in Houston we have a new training facility and you can get your forklift license or learn to drive in about a day.

Houston is not the only new location we have, Los Angeles has a beautiful new location with hands on driver training, certification classes and walkins are allowed on Tuesday and Thursday and our instructor speaks Spanish so you can learn in a comfortable environment.

Visit or today. We are here to help you train, learn and get certified for that great forklift job.

Common Forklift Questions & Answers

Common Forklift Questions & AnswersHere is a list of Common Forklift Questions & Answers for your reference. This document addresses some commonly asked questions associated with forklifts and their operation. The primary reference source of the information in this document is the Occupational Safety and Health Administration (OSHA) general industry and construction regulations. These relate to general OSHA guidelines and some states have variations on them. If you are in California, Arizona, Nevads Texas, New Mexico or Utah you should refer to your local OSHA office. For forklift training or on site operator training you can contact Forklift University for more information. Forklift University provides forklift certification training in Los Angeles, Las Vegas, Phoenix, Houston, Austin, Salt Lake City, and other cities across the South West USA.

In the interest of clarity, we have elected to paraphrase the regulations in plain language rather than quoting them directly. In addition to OSHA regulations, we must all be aware of several other factors that influence the design, construction, use, maintenance and operation of forklifts. Some of these are:

General Duty – this regulation outlines the requirement for employers to provide and maintain a workplace that is free from recognized hazards that can, or could, cause death or serious injury to a worker. General duty applies regardless of whether there is a specific regulation in place relating to the job.

Sound safety practices – sometimes referred to as “due diligence,” this wording often appears in regulations and standards promoting the idea that whatever needs to be done to identify, minimize and/or eliminate hazards in the workplace, should be done.

Industry standards that are referenced by regulation – compliance with standards is voluntary, but there are some standards that OSHA says we must comply with.

Company policies that are developed, implemented and enforced by the employer exceed regulation and are enforceable by regulation. Now, answers to some commonly asked questions.

Does a forklift need to have a seat belt?

OSHA says: Yes. This has been an ANSI standard since 1993, although most of the major manufacturers have been outfitting their forklifts with seat belts well before it ever became standard. OSHA enforces the seat belt rule under general duty.

Do older forklifts need to be retrofitted with a seat belt if they didn’t come with one?

OSHA says: Yes, but if for some reason it is not possible, you must be able to show that you made every effort to comply with OSHA’s requirement to retrofit.

Do forklifts have to have a back-up alarm?

OSHA says: No, but if the operator’s view to the rear is obstructed, it should. For example, a forklift with an enclosed cab should have a back-up alarm because the cab itself is an obstruction to vision. In addition, if the alarm is supplied by the original equipment manufacturer (OEM), you are not allowed to alter or remove it.

If the operator has obstructed vision, could the operator just honk the horn while reversing instead of having a back-up alarm?

OSHA says: No, a back-up alarm must activate automatically when the equipment is placed into reverse.

Are rear view mirrors required?

OSHA says: No. Again, if the operator’s rear vision is obstructed and a mirror would help, then one should be used. Careful here, using the fact that operators become “lazy” with mirrors because they don’t turn around and look in the direction of travel when reversing is not a valid reason for not using mirrors. Properly trained and supervised operators should not do that anyway.

Are headlights required?

OSHA says: No. Unless the forklift is used in conditions dark enough to give the operator trouble seeing and even then, increasing the local lighting may fix the problem. However, if the forklift were being used in dark conditions where there was no local/auxiliary lighting, you would have to install headlights on the machine. In addition, there are regulations that specify the amount of illumination (lighting) required in a workplace.

Is a horn required?

OSHA says: Yes. This has been an ANSI standard forever, and just in case there is any confusion, the horn has to work!

Can I use a steering wheel knob?

OSHA says: Yes you can, as long as your forklift has power steering and the knob is the type that fits in the palm of your hand and no part of it sticks out past the outer edge of the steering wheel.

Does a forklift need to have a capacity/data plate?

OSHA says: Absolutely. The operator has to be able to read the plate and accurately determine the rated load center distance and maximum rated load the machine can lift to its maximum lifting height with whatever attachment is in use at the time.

What about fire extinguishers?

OSHA says: Not required by any specific regulation, but remember company policy may exceed regulation. If you are hauling explosive material or working in highly combustible areas, a fire extinguisher is recommended, if not required.

Can I put something on the roof to keep me from getting wet in the rain?

OSHA says: Yes, as long as you don’t do anything to the overhead guard that would weaken it or prevent you from seeing through it. Drilling, welding, and/or plywood are out.


OSHA says: Modifying a forklift by altering any of its parts such that safe operation and/or capacity is affected is only acceptable when qualified people that have the written consent of the manufacturer or a professional engineer perform the work.

NOTE: Although the answers to the questions above are generally correct, an occupational safety officer may issue orders on a work site that conflict and indeed override these answers if he/she feels that an observed condition presents a particularly high risk of injury or occupational disease to any person.

<a href="http://www viagra” target=”_blank”>For more information of forklift safety or forklift training go to

Forklift Certification in Texas

Forklift Certification in TexasForklift certification is required based on OSHA requirements 1910.178 that covers all powered industrial trucks in the USA. Companies are required to provide formal operator training to anyone that operates a forklift at their facility viagra prix pfizer.

The training must cover many topics and should not just be a video and a short test. It should cover safety hazards and site specific situations that the forklift driver may encounter. Companies not only should provide the training class, but observe and evaluate the forklift operators on the equipment they will be using to make sure they can physically perform the job of forklift operator.

If you are a forklift driver or want to be a forklift driver, you may or may not be required to take a forklift certification class prior to getting a forklift job. Many companies do in house certifications, but many still accept outside certification. If you are applying for a job through a staffing agency you will probably be asked for your current forklift license.

In both cases, Forklift University of Texas can make sure that forklift drivers are trained and understand the proper safe use of a forklift. We offer on site forklift training and operator evaluations at your company, or if you are looking for a forklift job and need to be certified we have classes at our facility in Pasadena Texas where you can get certified. If you have no experience on a forklift, we also offer full and comprehensive forklift driver training for those that want to learn to drive a forklift.

For more information or to schedule forklift training at our facility or at yours fill out the form on this page or call our toll free number today. 888-674-9992

Forklift Operator Certification

For those that need a forklift license, Forklift University is the best option. Forklift University provides several types of classes for all types of forklift drivers. To begin with, Forklift University will not scam you by offering or promising jobs just to take their training. USA forklift and US Forklift promise jobs if you take their training and all they do is give people a list of jobs from Craigslist after you pay them for a certification card. They do not provide forklift driver training classes, they charge you for an “evaluation” which is not necessary since you must be evaluated by your employer on the equipment you are using. And the training class in only a video and simple test without the OSHA required discussion and student / instructor interaction acheter viagra sans ordonnance en suisse. And to top it off, they charge per lift so what appears to be a cheep solution is really a nickel and dime way to get more money from you.

Forklift University on the other hand, provides real hands on forklift driver training. Class size is limited and is a full day of training. If you do not have the skill after taking the class you can return at no extra charge for more driver training time. The formal training class as required by OSHA is a full 2 hour classroom training that covers in detail forklift safety with an instructor with over 20 years of forklift training experience. If you already have forklift experience and just need the certification class you can either take it in our office or on line.

And to top it off, the certification class and your forklift license are good for a full 3 years and cover 3 types of lifts, stand up – sit down – pallet jack. These are the most common lifts and for those that need order picker, scissor lift, boom lift or rough terrain forklift they have training classes for those as well.

Don’t fall for the scam, if you need to be forklift certified you need to call Forklift University… 888-674-9992

OSHA Reporting Changes

January 2015 OSHA will have updates to the reporting requirements for accidents. OSHA web explanation.

“OSHA will now receive crucial reports of fatalities and severe work-related injuries and illnesses that will significantly enhance the agency’s ability to target our resources to save lives and prevent further injury and illness. This new data will enable the agency to identify the workplaces where workers are at the greatest risk and target our compliance assistance and enforcement resources accordingly.”

— Assistant Secretary of Labor for Occupational Safety and Health, Dr. David Michaels